How to wrap earbuds in the most protective way?

Earbuds are a sensitive piece of equipment that need to be taken care of. They are very delicate and should be handled with care. There are a few ways in which you can wrap your earbuds so that they last longer, stay cleaner and get better protection. Below we have listed three different ways in which you can wrap your earbuds to give them the best protection possible: 1) The first way is by using a rubber band to tie the two earphones together. This will help keep them from tangling up and will also help keep them from getting dirty when you put them in your pocket or bag. 2) The second way is by wrapping your earbuds around the end of an object such as a pen or pencil, this will also help

1. Two fingers wrapping

The first way is usually the simplest one. Hold the ear buds in your hand. Put your fingers in the “rock ‘n’ roll position”, using your index finger and little finger as guides. Wrap the headphones around your pinkie and your index finger. Clutch the middle and take your fingers out. Wrap the cord left around the middle. Done!


Other Ways To Wrap Headphones

1. Doing Crazy 8 Knots

1. Doing Crazy 8 Knots

  • You should check your headphones for any knots or tangles. First, ensure that your headphones don’t have any knots or tangles.
  • Make a fist. Make a fist before you fold the headphones.

 Wrap the headphones around your index finger and

  • Wrap the headphones around your index finger and your pinkies. You can tie the knot by wrapping the headphones around your index finger and pinkies until you have left a little bit of wire.
  • Then tie the knot. Take it out of your hand, wrap it around the headphones’ middle and tie a simple knot.
  • You are done. It is now ready to be stored in your pocket, or anywhere else you choose.

2. Doing a Double Wrap

  • Be sure to check for tangles. Before you begin folding, untangle them.
  • Fold your headphones in half, then fold them in half again. Continue folding your earbuds until they are the same size as a small ruler.

 Then tie the knot. Make a knot by carefully loopi

  • Then tie the knot. Make a knot by carefully looping the end of the headphone over the end.
  • Done! Now you can store it.

Read also:

How To Pair Beats Earbuds? Top Full Guide 2022

How To Wear Earbuds With Wings? Top Full Guide 2022

3. Making a DIY Headphone Holder

  • Get your supplies. You will need some glue and a small piece of Velcro to make a DIY holder.
  • Attach the Velcro at the tail of your headphones. The Velcro should be placed in the area just above the plug.

 Wait for 5 minutes. Allow the glue to dry for bet

  • Wait for 5 minutes. Allow the glue to dry for between 5-10 minutes before the Velcro attaches to the headphone.
  • Your headphones should be wrapped. You can fold your headphones however you like and wrap them with the Velcro strap.
  • Done! Now you can store it.

How do you make hard earbuds more comfortable?

Seat the eartip firmly

(For foam tips, you’ll need to compress the foam before inserting your earphones.) Instead, try gently pulling on the outer rim of your ear to ease the tip into a comfortable position. You should notice a drop in ambient noise when the tip is seated correctly.

Why do things knot?

iPhone earbud tangles are a function of the length of the wire and the amount of “agitation” the wire is subjected to. When the two are plotted against each other — length versus agitation — the rate of knots and tangles obeys a statistical pattern that describes a curve.

6. Plastic cord organizers

There are many cheap plastic or silicon cord organizers on the market, in a great number of colors and funny shapes. A boundless zoo with owls, elephants, cats, bones, whiskers, puppets, as well as geometric shapes and all types of aliens and monsters.

Do earbuds lose quality over time?

Aside from the usual wear and tear, headphones can eventually lose volume. This is due to the sound waves produced by it. … The sound will then degrade, losing its qualities like bass and volume. Over time, the volume will become low, and you’ll hear a lot of buzzing.

What is a math knot?

In mathematics, a knot is defined as a closed, non-self-intersecting curve that is embedded in three dimensions and cannot be untangled to produce a simple loop (i.e., the unknot). … The study of knots and their properties is known as knot theory.


Regardless of your earphones’ price and brand, you want them to continue working well for as long as possible.

The good news is that caring for your earphones does not require major investments in time and effort. Learning some simple care habits or using affordable accessories can go a long way in making your earbuds last through more travels, exercise sessions, and work days.

What do you think of these suggestions? Are there other causes of earphone damage or device care tips you want to add? Share them below.

Why Wrapping Headphones deserves It

✔ Saves Time

If you wrap your headphones, you will certainly conserve time in the long run. Not only will the procedure come to be quicker as well as quicker to do, yet not needing to disentangle the wire each time you take your earbuds out of your bag or pocket will certainly enable you to pay attention to your music far more efficiently.

✔ Enhanced Durability

Covering your earbuds can additionally expand their life of them, boosting their toughness lots. If you leave them unwrapped your earbuds might tangle in your carry or end up being damaged from any other products that you are saving in there. Drawing them out of your bag or pocket can additionally leave some areas being entrapped and also yanking the cable in an unnatural way.

✔ Stopping Any Frustration

When you involve your headphones and also take them out of your knapsack to locate that they remain in tangles, loops as well as knots, it can be irritating. Much more, when it pertains to attempting as well as untangle them, it can wind up leaving you feeling worried as well as irritated if there are some tight knots in the cable that you can’t fairly get your fingers under to untie.

When your earphone wraps around a device, you will get rid of any of this unwanted stress leaving you calm as well as comfortable for paying attention to your favorite music.

Other Headphone Wrap Options

The Over-Under Method

If you wrap your headphones in lots of different ways you can destroy the headphones’ cord over time from all of the different bends and kinks you create, this is even making some people completely paranoid and refrain from any kind of headphone wrapping technique. If this is you then the Over-Under method is for you.

With its method, all you are doing is simply alternating two different kinds of loops that help to counteract any kind of tangling when you unravel your headphones. To start, make a regular loop and then make another loop that will go in the opposite direction. The best and easiest way to do this is by grabbing the cable underhand, and then bringing it up and begin to twist it as you make a loop out of it.

This method can be a little difficult at first, and may take a little bit of practice, but after a few attempts you will have no problems in completing it and your headphones will not tangle what so ever and you will be able to easily unravel them when you need them quickly. Wrapping them up is a different story as no matter how good you are it will still take a little bit of time to wrap them up.

Use a Binder Clip

Binder clips can always be a great choice in any kind of cable management and make a great tool in this area. They can be used in a great way to hold together your wrapped headphones to prevent them getting tangled up inside your bag, or another way is to use the binder clip as the actual headphone wrapper.

Simply put the clip on the near of the earpiece and begin to wrap the cord around the two metal arms, this can help it be used as a cable shortener as well or clip your earbuds onto your backpack for a convenient listening experience. When you are finished you can take the headphone jack and feed it through the wider opening section of the arms of the clip. This is a versatile method but it also takes up a lot of space so it wont be as easy to just slide into your pocket.

Braid Your Headphones Using Paracord, Embroidery Floss, or String

If you are someone into crafts such as braiding then you can literally make a friendship bracelt for your headphone wire to make them completely tangle free. You can use both embroidery floss or just a regular piece of string. This method is only available if you know how to braid you can use parachute cord (also known as paracord). To use this simply run your earbud wire through the center of the paracord which will wrap and protect your cable.

Use an Old Credit Card

If you have a bit of time to spare and want an effective way to create something that is cheap, you can make headphone cord-wrapping devices out of an old credit, debit, or rewards card. All you have to do is cut two angled slots on each end of opposite sides.

It is best to make sure you create a larger opening at the end of the slots in order to fit the headphones’ cord through them. This method is similar to the binder clip as you can use the card as a cord shortener too, but it will overall take up less space.

This method is okay but cutting into sharp plastic like these cards can over time damage your headphone cord with the sharp bends that have been made, plus it is something that you need a bit of preparation time to make so it cant be used quickly.

Use Your Phone or MP3 Player as the Wrapping Device

Another useful way that you can wrap your headphones up is wrappingthem around your phone or mp3 devices. This way will not only make the device at as a guide for wrapping your headphones around but it will make sure that your headphones are never too far away from your listening device. Its all well and good having an efficient way to wrap your earbuds but if you can’t find them then there’s no point having them at all.

There are loads of ways to wrap your headphones, but the best possible way is probably to create a half-loop before you begin to wrap the cable around, and then try to use the loop to secure the end by keeping it tight down. This can be a little difficult

You can do this many ways, but arguably the best method is to create a half-loop before you start wrapping the cable around, and then use the loop to secure the end by tightening it down. It’s a bit tricky at first and can take some practice (see video above for a demo). Plus, you won’t be able to slip your device in and out of your pocket.

About This Article

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 46,267 times. How helpful is this? Co-authors: 7 Updated: November 7, 2018 Views: 46,267 Categories: Headphones

Thanks to all authors for creating a page that has been read 46,267 times.


Leave a Reply

Your email address will not be published.