How to wrap your headphones so that they don't tangle

How To Wrap Headphone Cords?

The Don’ts of Headphone Wrapping

Putting too much pressure on your wires by tightly folding and wrapping them, is sure to break your headphone in no time at all, as it will create pressure points that will eventually simply snap your cable.Mar 21, 2017

Step 2: Wrap on Device

Lets say this red thing is your device,Leave extra space near the plug in part of your head phones and wrap the rest around the device.

Video

Do headphones last longer than earbuds?

When it comes to headphones, bigger usually means longer lasting. Most wireless earbuds will get you five to six hours of juice on a single charge, while many top headphones are rated to last well over an entire day.

3. Leather headphone holders

This is a stylish solution to roll up your ear buds without tangling. A hand-made Italian leather earphone holder. It is a simple but elegant stripe of leather with a button on it. An original solution is to coordinate it with your nappa, cavallino, galuchat or python Apple Watch band.

A stylish way to wrap your earphone
A stylish way to wrap your earphone

The Over-Under Method

All those bends and kinks that you create by wrapping your headphones in different ways can destroy the cord over time, and some people are paranoid enough to avoid most wrapping techniques at all costs. If you’re nodding your head, the over-under method is for you.

You’re simply alternating two different kinds of loops to counteract any kind of tangling when you unravel your headphones, so start by making a regular loop and then make another loop that goes in the opposite direction. The easiest way to do this is to grab the cable underhand, then bring it up and twist it a little as you make a loop out of it. This method can be a little tricky at first and may take a bit of practice, but it doesn’t tangle your headphones at all and they’re easy to unravel when you need them quickly. [clear]

Other Ways To Wrap Headphones

1. Doing Crazy 8 Knots

1. Doing Crazy 8 Knots

  • You should check your headphones for any knots or tangles. First, ensure that your headphones don’t have any knots or tangles.
  • Make a fist. Make a fist before you fold the headphones.

 Wrap the headphones around your index finger and

  • Wrap the headphones around your index finger and your pinkies. You can tie the knot by wrapping the headphones around your index finger and pinkies until you have left a little bit of wire.
  • Then tie the knot. Take it out of your hand, wrap it around the headphones’ middle and tie a simple knot.
  • You are done. It is now ready to be stored in your pocket, or anywhere else you choose.

2. Doing a Double Wrap

  • Be sure to check for tangles. Before you begin folding, untangle them.
  • Fold your headphones in half, then fold them in half again. Continue folding your earbuds until they are the same size as a small ruler.

 Then tie the knot. Make a knot by carefully loopi

  • Then tie the knot. Make a knot by carefully looping the end of the headphone over the end.
  • Done! Now you can store it.

Read also:

How To Pair Beats Earbuds? Top Full Guide 2022

How To Wear Earbuds With Wings? Top Full Guide 2022

3. Making a DIY Headphone Holder

  • Get your supplies. You will need some glue and a small piece of Velcro to make a DIY holder.
  • Attach the Velcro at the tail of your headphones. The Velcro should be placed in the area just above the plug.

 Wait for 5 minutes. Allow the glue to dry for bet

  • Wait for 5 minutes. Allow the glue to dry for between 5-10 minutes before the Velcro attaches to the headphone.
  • Your headphones should be wrapped. You can fold your headphones however you like and wrap them with the Velcro strap.
  • Done! Now you can store it.

8. Credit card bobbin

If you want to show the world you don’t care about money, take a credit card and cut its edges to give it a bobbin profile shape. Make three cuts at two opposite edges to keep the buds and the plug in place.

How to not miss any new posts related to How To Wrap Headphones​ on your site?

What you need to do now is to enroll and build your Howtolinks account, you will receive helpful how-tos related to How To Wrap Headphones​ which are delivered to your inbox every day or week.

Why Do Headphone Wires Start to Twirl?

The cable is neatly braided
The cable is neatly braided

Headphone wires curling or twisting is caused by natural everyday use. Throughout the day, we’re constantly adjusting the position or orientation of our headphones. Perhaps we’ll set them down if we have to step away from our desks, then put them back on again, and as we do this, we sometimes inadvertently turn them in the process.

Turning them anywhere between 0-360° is enough to set off the twisting effect on the wires, especially if it happens all the time.

As the twisting effect worsens from the repeated turning of the device, the wires are forced out of their natural shape and tension builds. This isn’t immediately apparent at first, so we aren’t always able to detect or fix the problem early on.

Since headphone wires are flimsy and can’t exert enough strength to revert themselves to their original position, they collapse by twisting in on themselves to relieve the tension. As a result, you’re left with a tangled, twisted mess of wires.

You might be interested: Do expensive cables matter?

Why is it important to keep your wires from twirling?

Some people may be entirely unbothered by twisted headphone wires, but there are a couple of reasons why it’s essential to keep this from happening.

Firstly, if the wires are continually getting twisted and not set straight again, wear and tear can damage the plastic wire shielding to the point of exposing the copper wires inside. Secondly, constant twisting of the wires can also lead to microfractures and bends in those same copper wires, affecting sound quality, or ultimately rendering your headphones defective.

Cheap and midrange headphones may be more susceptible to wire damage from twisting due to the wires’ composition. On the other hand, most high-end headphones make use of a Litz wire, which consists of several individually-insulated copper wire strands woven together. This type of wire is generally considered to be more robust and more flexible.

Use Your Phone Or Player

Another great way to wrap your headphones is to use your phone or MP3 player as the actual wrapping device. It not only acts as a guide for your headphone wrapping, it ensures that your headphones and the device you use with it are never separated.

You can do this many ways, but arguably the best method is to create a half-loop before you start wrapping the cable around, and then use the loop to secure the end by tightening it down. It’s a bit tricky at first and can take some practice (see the video at the top of this post for a demo). An added bonus: you won’t be able to slip your device in and out of your pocket. [clear]

About This Article

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 46,267 times. How helpful is this? Co-authors: 7 Updated: November 7, 2018 Views: 46,267 Categories: Headphones

Thanks to all authors for creating a page that has been read 46,267 times.

Tags

Leave a Reply

Your email address will not be published.